Ricerca veloce
Tavoletta grafica digitale
Tavoletta grafica con schermo
Stampante 3D
Supporto
Language
Scegli il tuo paese
North America
South America
Oceania
Europe
Ricerca veloce
Tavoletta grafica digitale
Tavoletta grafica con schermo
Stampante 3D
Supporto
Scegli il tuo paese
North America
South America
Oceania
Europe
How to fix abnormal filament feeding?
If the app reports an abnormal feed, follow these diagnostic steps.
1. Check if the filament on the spool is tangled. If so, untangle and re-feed the filament.
2. Open the extruder cover and inspect the extruder. If filament is stuck inside, refer to Section 4.2 Filament Breakage. If there is debris on the gear, clean it with a soft brush and re-feed.
3. The filament may have broken inside the Bowden tube. Refer to Section 4.2 Filament Breakage, confirm the tube is clear, and re-feed.
4. If none of the above resolves the issue, the nozzle may be clogged. Refer to Section 4.3 Nozzle Clog.
Scegli il tuo paese
North America
South America
Oceania
Europe