Recherche rapide
Tablette à dessin numérique
Moniteur de dessin
Imprimante 3D
Language
Choisir votre région et pays
North America
South America
Oceania
Europe
Recherche rapide
Tablette à dessin numérique
Moniteur de dessin
Imprimante 3D
Choisir votre région et pays
North America
South America
Oceania
Europe
How to fix layer separation, missing layers, or an inconsistent first layer?
Layer separation, missing layers, or an inconsistent first layer are usually caused by under-extrusion.
1. Nozzle clog: Check for a nozzle clog, as partial blockages can reduce extrusion flow. Refer to Section 4.3 Nozzle Clog to clean the nozzle.
2. Incorrect print temperature: The app's default temperature may not be optimized for third-party filament. Refer to Section 3.1.2 Advanced Printing to adjust the temperature.
3. Damp or degraded filament: Using degraded or moisture-absorbed filament can cause uneven flow and stringing. Replace the filament and try again.
Choisir votre région et pays
North America
South America
Oceania
Europe