Recherche rapide
Tablette à dessin numérique
Moniteur de dessin
Imprimante 3D
Language
Choisir votre région et pays
North America
South America
Oceania
Europe
Recherche rapide
Tablette à dessin numérique
Moniteur de dessin
Imprimante 3D
Choisir votre région et pays
North America
South America
Oceania
Europe
How to fix abnormal filament feeding?
If the app reports an abnormal feed, follow these diagnostic steps.
1. Check if the filament on the spool is tangled. If so, untangle and re-feed the filament.
2. Open the extruder cover and inspect the extruder. If filament is stuck inside, refer to Section 4.2 Filament Breakage. If there is debris on the gear, clean it with a soft brush and re-feed.
3. The filament may have broken inside the Bowden tube. Refer to Section 4.2 Filament Breakage, confirm the tube is clear, and re-feed.
4. If none of the above resolves the issue, the nozzle may be clogged. Refer to Section 4.3 Nozzle Clog.
Choisir votre région et pays
North America
South America
Oceania
Europe