Tableta gráfica
Tableta digitalizadora con pantalla
Impresora 3D
Por favor, seleccione su país / región
North America
South America
Oceania
Europe
How to fix poor bed adhesion or warping?
Layers bulging outward or downward, poor adhesion, or warping are typically caused by overheating.
1. Print temperature too high: Refer to Section 3.1.2 Advanced Printing to reduce the nozzle temperature.
2. Printing speed too high: Refer to Section 3.1.2 Advanced Printing to reduce print speed. In Standard mode, the default is 300 mm/s — try reducing by 10–20 mm/s and observe.
Por favor, seleccione su país / región
North America
South America
Oceania
Europe
