Digitales Zeichentablett
Zeichnungsmonitor
3D-Drucker
Unterstützung
Bitte wählen sie ihr land / ihre region aus
North America
South America
Oceania
Europe
How to fix poor bed adhesion or warping?
Layers bulging outward or downward, poor adhesion, or warping are typically caused by overheating.
1. Print temperature too high: Refer to Section 3.1.2 Advanced Printing to reduce the nozzle temperature.
2. Printing speed too high: Refer to Section 3.1.2 Advanced Printing to reduce print speed. In Standard mode, the default is 300 mm/s — try reducing by 10–20 mm/s and observe.
Bitte wählen sie ihr land / ihre region aus
North America
South America
Oceania
Europe
